created. Higher numbers result in more slices, up to a maximum of 64
slices.
Beat – Slices are placed at musical beat divisions. The Division encoder
selects the beat division at which Simpler will slice the sample region.
Region – Slices are placed at equal time divisions. The Regions
encoder selects the number of evenly spaced slices that will be
created.
Manual – When Manual is selected, no slices are placed automatically.
Instead, slices are created manually by enabling the Pad Slicing control
and tapping empty pads as the sample plays back. To create manual
slices:
1.
Tap a pad that contains a slice to begin playback from that slice.
2.
When the sample reaches the point at which you would like to
create an additional slice (a drum hit, for example), tap any empty
pad.
3.
A slice will be placed at this point and it will be assigned to a pad.
Any pads that were already assigned after this point will be shifted
upward on the pad grid.
4.
Once the loop is sliced how you want it, turn Pad Slicing off.
In all slicing modes, slices are laid out from left to right in groups of four
starting from the bottom left pad. Each additional four slices is placed
on the next four pads up. After the left half of the pad grid is used,
slices are placed along the bottom row on the right side of the pad grid,
again moving upwards in groups of four.
To Next Page
Loading...
Need help?
General
