Ableton Push 3 User Manual

off. When on, the button is red; when off, it is white.
The Automate Button.
Switch on the Automate button to record automation. When using Push
in Control Mode, the Automate button also toggles Live’s Session
Automation Arm button. In Device View, select the track that contains
the clip you want to automate, then press the Record button. As you
make adjustments to different device parameters, the automation will
be recorded in the clip.
7/29/23, 9:32 AM
Page 164 of 193

Ableton Push 3 Specifications

General

Type	MIDI Controller / Standalone Instrument
Standalone Mode	Yes
Sample Rate	Up to 96 kHz
Bit Depth	24-bit
Pads	64
Display	Full-color
Connectivity	USB, MIDI I/O
Power	external power supply
Storage	Internal SSD
Software	Ableton Live
Compatibility	Ableton Live 11.3 or later
Processor	Intel-based processor (specific model not disclosed)