Ableton Push 3 User Manual

build. You can press the display button above Update to download the
latest software. Make sure the power supply is connected when
updating.
Available Firmware Update.
A progress bar will be displayed as the update is installed. If needed,
you can cancel the process using the highlighted lower display button
on the right before the update finishes. Once the update has finished
installing, the hardware will need to be restarted to apply the changes.
2.2.8.4 Advanced Options
You can access a few advanced options in the Software tab by holding
down the Shift button.
7/29/23, 9:32 AM
Page 20 of 193

Ableton Push 3 Specifications

General

Type	MIDI Controller / Standalone Instrument
Standalone Mode	Yes
Sample Rate	Up to 96 kHz
Bit Depth	24-bit
Pads	64
Display	Full-color
Connectivity	USB, MIDI I/O
Power	external power supply
Storage	Internal SSD
Software	Ableton Live
Compatibility	Ableton Live 11.3 or later
Processor	Intel-based processor (specific model not disclosed)