5.1.2 Save a Set as a New Version
To save a new Set inside of the Project folder where your current Set is
located, hold the Shift button and press Save. This allows you to create
new variations of a Set, without taking up much space on Push’s hard
drive, as the samples will only be stored in one Project folder for all
variations.
The Shift Button.
5.1.3 Save a Set as a New Project
To save your Set in a new Project folder, hold the Duplicate button and
press Save. This can be useful when you want to use your current work
as a starting point for a new piece, or for separating tracks from one
Set into another. All of the referenced samples and recording will be
copied into the new Project folder.
To Next Page
Loading...