2.2.1 Status Tab
The Status Tab.
As previously mentioned, you can check which User Mode Push is
currently set to, and switch modes as needed, in the Status tab.
Under the Standalone/Control Mode entry, you can view the battery
level. If Push is charging, this will also be reflected in the battery icon.
Generally, the battery will last for about 2.5 hours of music making.
When the battery reaches below 7%, a battery icon will be shown on
Push’s display no matter what view you are in. If the battery runs out
while you are using Push, the current Set will automatically be saved
and the hardware will shut down safely.
You can also see the available amount of space left on the SSD in
standalone units.
Display Light adjusts the brightness of Push’s display, while LED
Brightness adjusts the brightness of the pads and buttons. The default
(and recommended) setting for both controls is 100%.
Workflow can be set to Scene or Clip. This option determines how
scenes and clips behave when pressing the Duplicate and New buttons
or the up and down arrows on the Session D-pad.
Which option you choose depends on how you like to organize your
To Next Page
Loading...