Ableton Push 3 User Manual

Select a Drum Rack Pad Then Add Steps in the Sequencer.
You can build up a pattern by selecting different Drum Rack pads and
adding steps to the sequence.
To add steps to the sequencer without triggering the Drum Rack pad’s
sound, hold Select and then press the pad you want to sequence.
You can delete steps by pressing the corresponding pads in the
sequencer. To delete all the steps that belong to a specific Drum Rack
pad, hold the Delete button and then press that pad.
If you want to see all of the steps that have been added to the loop,
press the Clip button to enter Clip View.
7/29/23, 9:32 AM
Page 77 of 193

Ableton Push 3 Specifications

General

Type	MIDI Controller / Standalone Instrument
Standalone Mode	Yes
Sample Rate	Up to 96 kHz
Bit Depth	24-bit
Pads	64
Display	Full-color
Connectivity	USB, MIDI I/O
Power	external power supply
Storage	Internal SSD
Software	Ableton Live
Compatibility	Ableton Live 11.3 or later
Processor	Intel-based processor (specific model not disclosed)