Pairing button
Press 1x shortly to turn on the camera,
Press 3x shortly, the camera is ready for pairing,
Press and hold the button for at least 5 seconds to turn off the camera.
Status LED
Flashes during charging.
When fully charged and in cable operation, it shines red permanently.
During a recording or a live view, the LED lights up permanently.
Micro-USB connection
Connection for charging the integrated rechargeable batteries
¼" Thread for fixing the bracket
Each bracket with ¼" thread is supported.
Attention!
If the Micro-USB cable is used permanently, the weather protection capability of the
camera will expire.
Loading the Camera
Remove the camera from the bracket and connect the included Micro-USB cable. Use a 5VDC / 2A
power plug to charge the camera, the base station's AC adapter is suitable for quick charging of the
camera. The camera will be fully charged in about 4 hours. During charging, the red LED on the back
flashes when the charging process is completed and the LED shines permanently. The battery lasts up
to 13 months, depending on the trigger frequency, live image access and external environmental
influences. More information can be found at the menu item 13. Battery FAQs.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
