4.2.3. Add already configured base station
To set up a base station that is already set up with the network, please proceed as follows.
Open the app and click on the "+" to add a base station click on the battery cam. Click on "Existing
device" to add the base station already learned in the network to another smartphone.
Enter a name for your camera. To enter the DID, you have the following options, scan the QR code on
the back of the base station, search for the base station in the network using the "Search" button, or
enter the DID of the camera manually.
The camera's default security code is "123456". If the base station has already been set up, enter the
security code assigned to the base station.
Press the "Confirm" button to add the camera.
Note
If the base station with the default security code "123456" is added, it must be changed
the first time the camera's Live screen is accessed.
Note
If a base station has already been set up from another phone or user, select this method
to add base stations that have already been set up.
4.2.4. Pairing a new camera with a base station
Press the pairing button for at least 3 seconds until the LED
flashes blue. The voice command "Ready for Camera
Connection" is played. If the camera has already been paired
in another base station, please delete it from the camera list in
the app beforehand.
Shortly press the power icon 3 times to turn the camera on.
The red LED on the back and the blue LED at the white light
LED flash alternately during the teach-in process. If the
connection is successful, the voice command "Camera
connection successfully completed" is played back.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
