9. Info page
The info page displays general information about the camera, e.g. installed firmware version or MAC
address of the camera.
9.1. System status
The info bar also shows you the system status.
System is running correctly
All parameters such as system temperature and processor usage are fine. All functions in
use are working correctly.
System is faulty
Errors have occurred in the system. But these are not critical to the basic functionality of
the camera. However, they could cause limitations or malfunctions within certain functions.
The system may need to be tested by the installer.
System condition is critical
Certain parameters such as system temperature or processor usage are critical for the
system. The system must be tested by the installer immediately.
To Next Page
Loading...
