11.10.4. Snapshot
After enabling and configuration, single frames can be saved on the SD card. The single frames can
be saved in a time-controlled and/or event-controlled manner.
Timing Snapshot
Enable: enables time-controlled storage.
Format: Set the format of the single frames.
Resolution: Set the resolution of the single frames.
Quality: Set the quality of the single frames here. This has an effect on the file
size of the single frames!
Interval: Set the storage interval here.
(minimum 1 second, maximum 7 days)
Edit schedule: You can determine the schedule for storage here.
Event-triggered snapshot
Enable: After activation, single frames will be saved on the available storage
media when the event occurs, if the “FTP/SD/NAS upload” action has
been selected in the alarm manager.
Format: Set the format of the single frames.
Resolution: Set the resolution of the single frames.
Quality: Set the quality of the single frames here. This has an effect on the file
size of the single frames!
Interval: Set the storage interval here.
(minimum 1 second, maximum 7 days)
Capture Number: here you can define the number of images saved after an event (1-120).
To Next Page
Loading...
