Maintenance
103
Maintenance
Note
This menu is used for device maintenance, and
should only be operated by experienced users.
Device information (serial num-
ber, firmware status etc.)
A search of recordings or in-
formation (S.M.A.R.T. HDD sta-
tus) can be made in the log file
according to certain criteria
(alarms, exceptions, operation
or information).
Used to export or import the
settings
Carries out a firmware upgrade
Displays the transmission and
reception rate of the recorder
Note
The information menu shows the technical data
for the device and information on the various set-
tings of the cameras, recording etc.
This can be useful for support queries, for exam-
ple.
Note
An event search can be made according to the fol-
lowing main types, events and parameters:
All
Alarm
Exception
Operation
Information
All
Alarm Input/Output
Start/Stop Motion Detection
Start/Stop Tamper-proof
All
Video Loss Signal
Video Signal Exception
Illegal Login
HDD Full
HDD Error
IP Conflicted
Network Disconnected
Exception recording
Video input/output signal
not equal
Recorder buffer overflow