Technical data
109
Technical data
Subject is to alterations and errors. The dimensions are approximate values.
Monitor: 1 x BNC (1.0 V p-p, 75 Ω), 1 x VGA
VGA:
1080P: 1920*1080/60 Hz, 1280*1024/60 Hz,
720P: 1280*720/60 Hz,1024*768/60 Hz
BNC Output:
PAL: 704×576, NTSC: 704×480
Resolution @ frame rate per
camera (recording)
WD1, 4CIF, 2CIF, CIF, QCIF @ 25 fps
Manual, schedule, motion detection
By event, date and time, S.M.A.R.T.
Live view, playback, data export
Acoustic warning, OSD signal, e-mail
German, English, French, Dutch, Danish,
Italian, Polish, Spanish, Swedish, Russian
HDD storage capacity
In addition to the actual storage capacity of the installed HDD, the required storage space for recording and surveil-
lance depends on the set resolution and frame rate of the recording.
On the included CD you can find a program in order to calculate the required amount of memory. In addition you find
this software for download on our homepage.
Overview monitor output combination
It is possible to connect a SPOT monitor. Use the table below to find out what combinations are possible. A tick indi-
cates that the combination is possible, a cross shows that it is not.