Need help?Do you have a question about the AC Tech SM010S and is the answer not in the manual?
Hazards of live parts, sensitive components, and need for qualified personnel.
Details input voltage ranges and tolerances for different series.
Specifies required circuit breakers or fuses for safe operation.
Provides required wire gauges (AWG, mm²) for different models.
Guidelines for connecting input power and output motor wires, avoiding internal contactors.
Drive supports speed references via speed pot, 0-10 VDC, and 4-20 mA signals.
How to select speed references using terminals and parameters.
Calibrates drive for applied input voltage (HIGH/LOW).
Defines how the drive starts (normal, power up, DC brake, flying restart).
Defines how the drive stops (coast, DC brake, ramp).
Selects speed reference source when in standard mode.
Sets maximum allowable output current of the drive.
Drive provides solid-state motor overload protection.
Selects operation mode (user/OEM) and resets parameters to defaults.
To Next Page
General