18
BEEPER
(on/off)
BRIGHTNESS
(level)
TIME / DATE
(year, am/pm,
hrs, min, month, day)
TEST REMINDERS
(1, 2, 3)
HYPO INDICATOR
(off/on, level)
You are here
Setting the Beeper On/OFF
The meter beeper is preset to “On1.” This means the beeper is on. Setting the beeper to “OFF” does not
affect test results.
The beeper is helpful because it prompts you:
• To apply blood or control solution to the test strip
• When enough blood or control solution is drawn into the test strip
• When the test is complete
• When the hypo indicator is turned on and the result is below the level you have set
• If an error occurred
man_07699336001_01_EN.indb 18 28.09.2015 13:26:09
To Next Page
