105
Using the meter as an electronic notebook
5
You can exit memory at any time:
To do this, press the Test button.
The meter turns off.
Notes
i
Always turn the meter on with the M button if you intend to
review results held in memory.
If you turn the meter on with the Test button and there is a drum
in the meter, a test strip will be advanced.
i
If no result has been saved in the meter, just three horizontal bars
are displayed.
man_06919570001_01_EnCan.indd 105 18.01.2013 18:38:39
To Next Page
Loading...
