124
Acoustic Mode
Farbe: P 249 – Prüfmittelnummer: 203
Each digit is represented by the corresponding number of beeps; e.g. 4
beeps for the number 4 ( – – – – ). Zero is represented by a long beep
( — ).
The result is announced three times in succession. Each result is
preceded by two short beeps ( - - ) . Altogether, therefore, you hear: -
- result - - result - - result.
mmol/L meters
First the tens are announced, then the units, then the decimal point and
finally the tenths. There is a short pause between each group of beeps.
The tens are always announced, even when the result is below 10. The
tens in this case are represented by 1 long beep, signifying zero. The
decimal point is represented by 1 very short beep (
.
).
Examples:
The result 13.8 mmol/L is announced as follows:
1 beep – pause – 3 beeps – pause – 1 very short beep – pause– 8
beeps ( – – – –
.
– – – – – – – – )
The result 4.0 mmol/L is announced as follows:
1 long beep (for 0 tens) – pause – 4 beeps – pause – 1 very short
beep – pause – 1 long beep ( — – – – –
.
— )
man_06919570001_01_EnCan.indd 124 18.01.2013 18:38:44