135
Checking your meter
7
You can only flag a test result while the result is still being displayed.
Press the S button twice. The bottle symbol
is displayed.
If you press the S button one more time, the bottle symbol disappears
again.
After flagging the result as a control test:
Compare the result with the concentration table printed on the peel-
off label attached to the drum container.
The result must be within the concentration range printed on the label.
Accu-Chek
®
Compact Plus Control
mmol/L
G2 7.1–9.6
The figures shown are for
illustration only
man_06919570001_01_EnCan.indd 135 18.01.2013 18:38:49