86
Wireless Communication and Meter Pairing
7
Auto‑Send
Select whether data is automatically sent to the default paired device after each test.
Turn the meter on by briefly
pressing . From Main Menu,
press to highlight Settings.
Press .
1
Press to highlight Wireless.
Press .
2
Press to highlight
Auto‑Send. Press .
3
Press or to highlight On or Off. Press to move to the
option.
Press
to set the option and return to the previous menu.
4
Auto‑Send
54988_08100918001_EN.indb 86 9/30/16 5:04 PM
To Next Page
Loading...
