38
Control Tests
4
Performing a Control Test
You need the meter, a test strip, and control solution Level 1 or Level 2.
Check the Use By date on the test strip container.
Do not use test strips past the Use By date.
Remove a test strip from the test strip container.
Close the cap tightly.
1 2
Insert the metallic end of the
test strip into the meter. Place
the meter on a flat surface.
The meter turns on. Preparing
to test appears.
Apply drop appears.
3
54988_08100918001_EN.indb 38 9/30/16 5:04 PM
To Next Page
Loading...
