Name: Accu-Chek Guide
Brand: Accu-Chek
Rating: 4 (1 reviews)

To Next Page

To Previous Page

The Accu-Chek FastClix Lancing Device

Inserting a Lancet Drum

You must ﬁrst load the lancet drum into the lancing device to get it ready for use.

Remove the cap.

Insert a new lancet drum, white

end ﬁrst, until it clicks ﬁrmly

into place.

Slide the cap on until it stops by

aligning the notch on the cap

with the notch on the lancing

device.

You are now ready to use the

first lancet.

The lancet counter shows a

number6, meaning you have

6new lancets remaining.

NOTE

Once the lancet drum is inserted into the lancing device, do not remove the lancet drum until

completely used. The lancet drum cannot be reused once it has been removed from the lancing device.

WARNING

You must not insert the lancet drum into the lancing device and simultaneously press the release

button or hold the lancing device with the release button resting on a surface such as a table top. This

could release a lancet and inadvertently cause injury.

54988_08100918001_EN.indb 20 9/30/16 5:04 PM

Questions and Answers:

Need help?

Do you have a question about the Accu-Chek Guide and is the answer not in the manual?

Accu-Chek Guide Specifications

General