Accu-Chek Nano User Manual

30
1. To make sure the display is
working properly, turn o the
meter, then press and hold
to see the complete display. All
segments should be clear and
look exactly like the picture. If
any segments are missing from
the display, there may be a
problem with the meter.
Contact the ACCU‑CHEK
Customer Care Service Center
at 1‑800‑858‑8072.
2. Wash your hands with warm
soapy water and dry
thoroughly. Dirty or wet hands
could affect results.
3. Prepare the lancing device.
4. Check the Use By date on the
test strip container. Do not use
test strips past the Use By
date.

Accu-Chek Nano Specifications

General

Display Type	LCD
Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	500 results
Automatic Power Off	Yes
Memory	500 results
Dimensions	69 x 43 x 20 mm
Weight	40 g with batteries
Measuring Range	0.6 - 33.3 mmol/L
Operating Conditions	10 - 90% relative humidity