Connect the drain
Pull out the black drain cap (indicated as C in Figure 7 above), then connect the white drain hose
from the accessory, and connect the other end again to drain to the main drain.
Instructions
Clean the Ice Machine Before First Use
Before using your ice machine, a thorough cleaning is highly recommended.
1. Open the ice removal door.
2. Clean with diluted detergent, warm water and a soft cloth.
3. Repeatedly wash the internal parts that are in contact with water; you can pull the drain
pipe of the water tank ("7" as shown in Figure 2) to drain the cleaning water in the water
tank, and then wash the internal freezer until all internal parts are cleaned. Clean, then drain
all wash water from the drain on the back of the unit. The drain pipe of the water tank and
the cover of the device drain must be reinstalled, otherwise, the device will not be able to
make ice properly. It is also recommended that you should discard the ice cubes made from
the first ice making cycle after cleaning.
4. The exterior of the ice machine should be cleaned regularly with a mild detergent solution
and warm water.
5. Dry the inside and outside with a clean, soft cloth.
Figure 7
To Next Page
Loading...