Acekool CIM 2 - Dispose of the Product Properly

25
water
The small hole in the shunt tube
is somewhat clogged
Clean the water distribution pipe to make sure
all nine holes are unobstructed
Ice cubes are very thin
Ambient temperature is too
high
Move equipment to a low temperature space,
or extend the duration of each ice cycle
Poor air circulation around the
device
Make sure there is more than 8 inches of space
between the front and rear of the device and
obstacles
The ice cubes are too thick Ambient temperature is too low Reduce time per ice making cycle
The "Ice Full" symbol lights
up
Ice bin full of ice cubes Take out some ice cubes
The ice cycle is normal, but
no ice is produced
The ambient temperature or
the water temperature in the
tank is too high
Refrigerant leak
Move to a place where the temperature is
below 90 degrees Fahrenheit and switch to
cold water
Blocked cooling system pipes
Requires technical maintenance personnel to
maintain
The ambient temperature or
the water temperature in the
tank is too high
Requires technical maintenance personnel to
maintain
Dispose of the Product Properly
This sign indicates that this product should not be disposed of with other
household waste. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, waste should be recycled responsibly to
promote sustainable reuse of material resources. To return your used device,
please use the returns and recycling system or contact the retailer where you
purchased the product. They can use the product for environmentally safe
recycling.