enter the self-cleaning program. The " " symbol will stay on during this time; the number to
the left will indicate the time remaining. The total duration of a self-cleaning program is 20
minutes.
Canceling the self-cleaning program: It takes approximately 20 minutes to complete a
self-cleaning program. When the program ends, the system will automatically enter standby
mode. You can also force the automatic cleaning cycle to be canceled by pressing the On/Off
button on the control panel.
Timer Setting Operation
Delay time range: 1-24 hours, default time: 1 hour
How to set the On Timer: When the unit is in standby mode, press the Timer/Clean button to set
the timer. The " " symbol will illuminate and the number "1" above the symbol will flash to
display the set delay time. While the number flashes, press the "+", "-" button to change the
delay time of the timer, each press the "+" or "-" button to increase or decrease by 1 hour. Five
seconds after setting, your desired setting will be remembered.
How to cancel the on-timer: Press the "Timer/Timer" button; the number above the symbol
" " will flash, showing the current delay time of your on-timer, press the button again to
cancel the timer setting, the symbol " " and numbers will also disappear. The second easy way
to cancel the on-timer is to press the On/Off button, which will force the on-timer setting to be
canceled.
How to set the shutdown timer: When the machine is working, press the "Timer/Clean" button
to set the timer to stop. The " " symbol will start to light up and the number "1" above the
symbol will flash to display the set delay time. While the number flashes, press the "+", "-" button
to change the delay time of the timer; each press of the "+" or "-" button will increase or
decrease the time by 1 hour. Five seconds after setting, your desired setting will be remembered.
How to cancel the off timer: Press the "Timer/Wash" button, the number above the symbol
" " will flash, showing the current delay time of your off timer, then press the button again to
cancel the timer setting, the " " above and numbers will also disappear; the second easy way
to cancel the shutdown is to press the "On/Off" button, which will force the On Timer to be
canceled and also shut down the unit.
To Next Page
Loading...