the water completely. Then reinstall the drain hose to the tank.
10. Repeat steps 8-9 two more times.
11. Follow the procedure above to clean the ice storage bin.
12. This special cleaning routine is now complete and you can go back to normal ice making
mode. It is recommended to discard the first batch of ice cubes.
Cleaning Advice
1. Daily cleaning
You should clean the ice shovel, door and water distribution pipe yourself every day. At the end
of each day, rinse the ice shovel and wipe the sides of the door with a clean cloth.
2. Clean once every two weeks
According to the internal cleaning plan, clean the ice shovel, freezer, water tank, full ice detection
plate and evaporator surface every two weeks.
3. Cleaning once every six months
This includes all parts and surfaces exposed to water or ice, such as ice storage bins, water tanks,
doors, evaporators, pumps, silicone hoses, water distribution pipes, etc. Clean with Nu-Calgon
Nickel Safe Ice machine Cleaner every 6 months. They should be cleaned by maintenance
personnel according to the Ice Component System Cleaning Procedure.
To Next Page
Loading...