Acer Altos EasyStore - Page 114

Altos eas
y
Store Manua
l
Chapter
5 Protecting Local Disks
107
4 . If you did not save the file to a shared folder , t ake the floppy disk or USB disk to
a computer with Internet and e-mail access.
5 . From the computer that has Interne t and e-mail access, e-mail the license f ile to
the
following address:
Activate.Keycode@falconstor.com
6 . When you receive an e-mail response, save the returned license file back to the
shared
f older , floppy disk, or USB disk.
7 . If you did no t save the file to a shared folder , t ake the floppy disk or USB disk
back
t o the computer where DiskSafe Express is installed.
8 . From the Action menu, click Li cense --> Offline Activation .
9. Click Import Activation Code .
10 . On the Open dialog box, browse to the location where the returned license file
exists
and double-click it.
11 . On the confirmation message, click OK .
The license is now activated and you can continue t o back up and recover your
disks.
12 . To close the dialog box, click Exit .
Replacing your existing license
To replace your existing license:
1 . From the Action menu, click Li cense --> Add License .
The Add License dialog box displays your current license key code.
2 . In the License key code text box, enter the new key code.
3. Click OK .
4 . When the confirmation message displays, click OK .
If your computer has an Interne t connection, t he license is activated
automatically
. If your Interne t connection is temporarily down, your license will be
activated automatically the next ti me you run DiskSafe Express with a restored
Interne t connection. If this computer does not have an Internet connection , you
must perform offline activation (as described in t he previous section.)