Acer Altos EasyStore - Recovering a Data Disk

Altos eas
y
Store Manua
l
Chapter
5 Protecting Local Disks
124
When you enable remote boot, your network connection will be temporarily
interrupted . It is recommended tha t you enable remote boot when t his will not
adversely
affect any network applications that you might be running.
If
remote boot is successfully enabled, a new backup is created automatically .
Once you have enabled remote boot, if you subsequently want to boot remotely
using a dif f erent network interface card (NIC), you must first disable remote boo t
and then enable it again , specifying the o t her NIC. In addition, after you recover a
disk
while booting remotely , you must disable and re-enable remote boot.
Enab ling remote boot
To enable remote boot:
1 . In the Protected disk list on any page, select your system disk or partition .
If you protected multiple system disks or partitions, select the first system disk or
partition
on your computer (typically Disk 0).
2 . From the Action menu, click Enable Remote Boot .
The Enable Remote Boot dialog box displays. This dialog box displays a list o f all
the NICs on your computer .
3 . From the list, select the NIC tha t you want to use when remotely booting from
the
storage system.