Acer Altos EasyStore - To a Degraded RAID Configuration

Altos eas
y
Store Manua
l
Appendix
B Disk Configurations
150
Adding hard disks to a degraded RAID configurat ion
To add a hard disk to a degraded RAID con f igura t ion:
1 . Insert the hard disk into the storage system .
You can do this whether the storage system is powered on or o ff.
2 . Access the Manager or refresh the browser window .
The Disk Change Notification page displays:
Note: I nitially , the Disk Status for the new disk might display Spare
rather than Rebuilding . If this occurs, refresh the page to update the status.
3. Click Continue to continue rebuilding the disk and return t o the Manager .
The Disks page shows the progress of the rebuilding progress.
Alternatively , if the information on this page is not correct, click Scan to scan the
storage
system again and update the page .
You can also click Shut Down to shut down the storage system. When you
restar
t the storage system, this page re-displays.