Acer Altos EasyStore - Page 156

Altos eas
y
Store Manua
l
Appendix
B Disk Configurations
149
When you click Add New Disk , the following page displays:
4 . Tak e t he desired action:
To do this Do this
Add the disk to a linear configuration
or
use it as a spare for a normal
three-disk RAID 5 configuration
Add the disk to the storage system
but not add it to the RAID at this time
Return to the previous page (for
example,
to re-scan the storage
system)
Click Add .
The Disks page indicates the current state of
the
disk configuration.
Click Ignore .
The Disks page lists the disk is part of the
storage
system, but its status is New ,
indicating
that it is not being used.
If you subsequently reconfigure the disks (as
described
in “Reconfiguring your storage
system
disks”), you will be able to use this new
disk.
Click Back .