Acer Altos EasyStore - To a Linear or Normal RAID Configuration

Altos eas
y
Store Manua
l
Appendix
B Disk Configurations
148
Adding hard disks to a li near or normal RAID configuration
To add a hard disk to a linear or normal RAID configuration:
1 . Insert the hard disk into the storage system .
You can do this whether the storage system is powered on or o ff.
2 . Access the Manager or refresh the browser window .
The Disk Change Notification page displays:
3 . To add the disk to the storage system , click Add New Disk .
If t he information on this page is no t correct, click Scan to scan the storage
system
again and update the page.
You can also click Shut Down to shut down the storage system , but you will be
presented
with t his page again the next time you access the Manager .