Acer Altos EasyStore - Responding to RAID Degradation

Altos eas
y
Store Manua
l
Appendix
B Disk Configurations
152
If you remove one or more viable disks and cause the entire RAID to fail, you can
shut
down the storage system, re-ins t all the same disks, and then restar t the storage
system. As long as you re-ins t all the original disks, the storage system
should be able to resume proper opera t ion, although the integrity of the data cannot
be guaranteed. However , if you replace the removed disks with new disks, you must
reconfigure
your disks (as described in “Reconfiguring your storage system disks”).
Caution: Recon f iguring your disks will delete all the data on your storage
system.
Responding to RAID degradation
When disk removal/failure causes RAID degradation , the Disk Change Notification
page displays when you access the Manager or refresh t he browser window: