Acer Altos EasyStore - Page 145

Altos eas
y
Store Manua
l
Chapter
5 Protecting Local Disks
138
19 . When the completion screen displays, review the results and do one o f the
following:
To do this Do this
Recover another disk
or
partition
Select Recover Another Disk .
If you want to recover a different backup of the same computer
from
the same storage system, select No to retain the current
configuration
settings and return to step 10.
If you want to recover a different computer’s backup, or if you
want
to recover a backup from a different storage system,
select
Yes to modify the current configuration settings and
return
to step 6.
Restart the computer Select Restart Computer .
When the informational message displays, select OK .
When
prompted to confirm that you want to restart the
computer, select Yes .
You have 10 seconds to remove the recovery CD from the
CD-ROM drive.
20 . When the computer restarts , use the appropriate procedure for your system to
configure it to boo t from the local hard disk once more.
If your computer is configured to boot from the local hard disk if no CD is in the
CD-ROM
drive, simply remove the recovery CD f rom the CD-ROM drive before
restarting.
21 . If you changed the recovery password on the storage system, reset it in the
Microsof
t iSCSI Ini t iator (as described in “Resetting the recovery password in
the
Microsof t iSCSI Initiator”).
22 . S t art DiskSafe Express and remove pro t ection from the recovered disk or
partition
(as described in “Removing protection”).
23 . Protect the recovered disk once again (as described in “Protecting your disks”
), re-using t he original backup .