Acer Altos EasyStore - Page 68

Altos eas
y
Store Manua
l
61
Chapter
3 Managing Your Storage System
61
To configure remote boo t:
1 . In the naviga t ion bar , click Backups .
2 . In the Computer name list in the Remote boot group box, select the name o f
the computer whose backup you want t o remotely boot from.
3 . If you’re remotely booting the computer from it s own backup, do not change the
MAC address . However , if you’re booting a dif f eren t computer from t he
selected computer’s backup, enter the MAC address of the NIC of the computer
tha
t you want to remotely boot in the MAC address t ext box.
Remote boot must have been previously enabled on tha t computer .
4 . From the Backup for booting remotely list, select the time and date o f the
backup
that you wan t to remotely boot from.
To always boot from the most recent backup, select Latest backup .
An asterisk (*) identifies the backup that will be used f or booting remotely .
Notes:
l You can remotely boot only from backups that were created after remote
boo
t was enabled on t he clien t computer .
l If the selected backup is deleted to make room for newer backups , the
most
recent backup will be used for booting remotely .
5. Click Apply Boot Info .
6 . When the confirmation message displays, click OK .
If you changed t he backup for booting remotely , an asterisk now displays next to
the
selected backup .