Acer Altos EasyStore - Page 78

Altos eas
y
Store Manua
l
71
Chapter
3 Managing Your Storage System
71
3 . Make the desired changes:
To change this Do this
The storage system name In the Storage system name text box, enter the new
name
to use for the storage system.
This name can be up to 15 characters long and can
include
letters, numbers, and hyphens.
Note: If you change the name of the storage system, be
sure
to also change that name in any local hosts files or
on
the DNS server in your network. The storage system
does
not register its name with your DNS server
automatically.
In Active Directory authentication mode, you cannot
change
the storage system name.
The system date, time, or
time
zone
Network Time Protocol
(NTP)
server name or IP
address
The administrator name
or
password
In the Date fields, enter or select the desired month, date,
and
year.
In the Time field, enter or select the desired hour, minute,
and
second.
In the Time zone list, select the desired time zone.
Note: The storage system time does not automatically
change
to reflect daylight savings time. To accommodate
this,
you can manually adjust the time and/or time zone as
needed.
In the NTP server name or IP address text box, enter the
name
or IP address of the NTP server from which the
storage
system should set its time. You can use a name
only
if it is resolvable.
The storage system will synchronize its time with the NTP
server every hour.
In the Administrator name text box, enter the user name
to
use for logging in to the Manager.
In the Password and Confirm password text boxes,
enter the password to use for logging in to the Manager. It
cannot
contain multi-byte words. This means you can only
enter
ASCII character whose code value is less than 128.
The user name and password are case-sensitive.
4. Click Apply .
5 . When the confirmation message displays, click OK .