Acer Altos EasyStore - Page 82

Altos eas
y
Store Manua
l
75
Chapter
3 Managing Your Storage System
75
To change this Do this
The packet size for
transferring
data
Specify whether or not to transfer larger data packets
between
the storage system and the computers in your
network
by selecting or clearing the Jumbo Frames check
box.
If you clear this option, the storage system will use 1514-byte
packets.
If you select this option, you can specify a larger packet size
(from 1514 to 9014 bytes).
Note: Using jumbo frames allows you to transfer data more
quickly.
However, you can select this option only if your
network,
Ethernet switch, and the network interface cards
(NICs)
on the computers in your network support the
specified
packet size. To determine whether you can use
jumbo
frames, refer to the documentation for those
components.
The FTP settings If you want to use the storage system as an FTP server,
select
the Enable FTP server check box.
If you do not want to use the storage system as an FTP
server, clear this option.
For information about accessing the storage system using
FTP, refer to “Accessing shared folders using FTP”.
4. Click Apply .
5 . When the confirmation message displays, click OK .
Note: If you changed the IP address of the storage system, you must
now access the Manager using the new IP address.