Acer Aspire 5333 - USB Module Removal; USB Module Installation

3-28 Machine Maintenance Procedures
USB Module Removal 0
Prerequisite:
Upper Cover Removal
1. Locate module (A) on lower cover.
2. Disconnect FFC cable (B) from mainboard connector (D)
3. Remove screw (C) from module (A).
Figure 3-29. USB Module
4. Remove module (A) from lower cover.
USB Module Installation 0
1. Align module (A) to pins (E) on lower cover.
2. Install module (A).
3. Connect FFC cable (B) to mainboard connector (D).
4. Install and secure screw (C) to module (A).
5. Install upper cover.
ID Size Quantity Screw Type
CM2x3 1
E
E
A
B
C
D