Machine Maintenance Procedures 3-39
LCD Module Installation 0
1. Align and install LCD module on lower cover (Figure 3-40).
2. Install and secure four (4) screws (E) to lower cover (Figure 3-39).
3. Install following cables to guides on lower cover (Figure 3-39):
WLAN cable (A)
microphone cable (D)
4. Place computer on surface, face side down.
5. Guide WLAN antenna cable (A) through opening (C) on lower cover (Figure 3-38).
6. Install mainboard.
ID Size Quantity Screw Type
E M2.5x5 4
To Next Page
Loading...
