2-18 System Utilities
Removing BIOS Passwords 0
To clear User or Supervisor passwords, open the DIMM door and use a metal instrument to
short the RTCRST# point.
Figure 2-18. CMOS Jumper Overview
Software Method 0
1. At a DOS prompt, enter clnpwd.exe.
2. Press 1 or 2 to clean the desired password. (Figure 2-19)
Figure 2-19. Clean BIOS Password
3. The on screen message shows function success or failure.
D:\Clnpwd>clnpwd
Acer Clean Password Utility V1.00
Press 1 or 2 to clean any password shown as below
1. User Password
2. Supervisor Password
Clean User Password Successful!
To Next Page
Loading...
