Acer Aspire 5333 - Camera Module Removal; Camera Module Installation

3-42 Machine Maintenance Procedures
Camera Module Removal 0
Prerequisite:
LCD Bezel Removal
1. Locate camera module (A) on LCD cover.
2. Remove cable (B) from connector (C).
3. Remove camera module from adhesive strip and guide pins (D) on LCD cover.
Figure 3-43. Camera Module
Camera Module Installation 0
1. Align and install camera module (A) with guide pins (D) on LCD cover.
2. Install cable (B) to connector (C).
3. Install LCD Bezel.
B
C
A
D