3-14 Machine Maintenance Procedures
DIMM Module Removal 0
Prerequisite:
Lower Logic Door Removal
1. Lift mylar (D) to provide access to module (A).
2. Push module (A) clips (B) to unlock module.
Figure 3-11. DIMM Module
3. Slide module (A) from mainboard connector (C).
4. Repeat steps 1 and 2 for remaining DIMM modules.
DIMM Module Installation 0
1. Slide module (A) into mainboard connector (C).
2. Press down on DIMM module (A) until clips (B) lock in place.
3. Install lower logic door.
To Next Page
Loading...
