Machine Maintenance Procedures 3-7
Getting Started 0
The flowchart (Figure 3-1) identifies sections illustrating the entire removal and install
sequence. Observe the order of the sequence to avoid damage to any of the hardware
components.
Perform the following prior to performing any maintenance procedures:
1. Remove external power (A) from the system. (Figure 3-2)
2. Remove all peripherals cables and from system.
Figure 3-2. AC Adapter
3. Place system on a stable work surface.
4. Move battery disconnect switch (B) on logic door to remove power. (Figure 3-3)
Figure 3-3. Battery Disconnect Switch
To Next Page
Loading...
