Machine Maintenance Procedures 3-11
Lower Cover DIMM Module Removal 0
Prerequisite:
Logic Door Removal
1. Locate DIMM (Dual In-Line Memory Module) module (A) on lower cover. (Figure 3-8)
Figure 3-8. Lower Cover Overview with DIMM Module
2. Unlock module clips (A). (Figure 3-9)
Figure 3-9. DIMM Module(s) in Lower Cover
3. Disconnect DIMM module from mainboard connector.
4. Repeat steps 2 and 3 for remaining DIMM module as required.
To Next Page
Loading...
