Machine Maintenance Procedures 3-53
LCD Module Removal 0
Prerequisite:
Upper Cover Removal
1. Locate LCD (Liquid Crystal Display) module (A) on upper cover. (Figure 3-69)
Figure 3-69. LCD Module on Lower Cover
2. Remove screws (B) from LCD hinges on lower cover.
3. Remove module.
LCD Module Installation 0
1. Align and install module hinges to lower cover guide pins (C). (Figure 3-69)
2. Install and secure screws (B) to lower cover.
3. Install upper cover.
ID Size Quantity Screw Type
B M2.5x5.0 2
To Next Page
Loading...
