5-6 Jumper and Connector Locations
Clearing Password and BIOS Recovery 0
This section provides users with the SOP (standard operating procedure) for clearing the
BIOS password and recovering the BIOS for the Aspire 5951G.
Clearing Password 0
The following procedure is only for clearing BIOS Password (Supervisor Password and
User Password).
Clearing BIOS Password 0
If a BIOS password (Supervisor Password and/or User Password) is set, the BIOS will prompt
for the password at system POST or upon entering the BIOS setup menu. Clear the password
check with the following procedure:
1. Remove AC adapter.
2. Locate CMOS jumper on mainboard (A). (Figure 5-3)
Figure 5-3. CMOS Jumper Overview
To Next Page
Loading...
