3-50 Machine Maintenance Procedures
USB Module Installation 0
1. Align and install module ports (D) to module port slots on lower cover. (Figure 3-65)
Figure 3-65. Installing USB Module
2. Align USB board to guidepin (E).
3. Install USB board on lower cover.
4. Install screw (C) to lower cover. (Figure 3-64)
5. Connect and secure module FFC (B) to module connector (b).
6. Install upper cover.
ID Size Quantity Screw Type
D M2.5x2.5 1
To Next Page
Loading...
