Machine Maintenance Procedures 3-37
4. Open module clips (D). (Figure 3-45)
Figure 3-45. DIMM Module(s) on Upper Cover
5. Disconnect DIMM module (E) from mainboard connector (e).
6. Repeat steps 2 and 3 for remaining DIMM module as required.
Upper Cover DIMM Module Installation 0
1. Connect DIMM module (E) to mainboard connector (e). (Figure 3-45)
2. Press on module until clips (D) lock into place.
3. Repeat steps 2 and 3 for remaining DIMM module as required.
4. Install DIMM module door (C) on upper cover. (Figure 3-44)
5. Install and secure screws (B) to upper cover.
6. Install keyboard assembly.
ID Size Quantity Screw Type
A M2.0x2.0 2
To Next Page
Loading...
