Jumper and Connector Locations 5-7
3. Short CMOS jumper point (RTCRST). (Figure 5-4)
Figure 5-4. CMOS Jumper Point
4. Plug in AC adapter.
5. Restart the system and press F2 to enter BIOS Utility Setup menu.
6. If no password prompt is shown, BIOS password is cleared.
7. If password prompt is shown, repeat steps 1 through 5.
Table 5-3. CMOS Jumper
Item Description
J1 (RTCRST) Clear CMOS Jumper
J2 (SRTCRST) Clear ME Jumper
To Next Page
Loading...
