Hardware Specifications and Configurations 1-15
Preparing the MediaRemote for use 0
Before using the MediaRemote as a detachable device, ensure the battery is fully charged.
The MediaRemote is already paired with your computer.
Status light 0
The status light (just above the Touchpad Mode button) indicates connection and battery
status.
Touchpad commands 0
The function of the touchpad varies, depending on the current setting.
The Touchpad mode key is illuminated while the MediaRemote touchpad surface is
active.
clear.fi shortcuts 0
If the clear.fi shortcuts are active, you can easily open the media sections of clear.fi. the blank
area of the touchpad can still be used as a pointing device.
Table 1-2. Status light
Light Description
No light The MediaRemote has not been used for 15 minutes and is in
sleep mode.
Blue The MediaRemote is active and attached to the computer.
Blue flash The MediaRemote is active and not attached to the computer.
Slow orange flash Battery power is low (less than 40%).
Quick orange flash Battery power is very low (less than 20%). The MediaRemote
will enter sleep mode after three minutes of inactivity.
Charging The light shows amber when the battery is charging.
Fully charged The light shows blue.
Table 1-3. Touchpad commands
Icon Item Description
Touchpad mode Change the function of the touchpad surface:
Press once to activate clear.fi shortcuts.
Press again to activate the media console.
Press and hold to turn the MediaRemote on
or off.
To Next Page
Loading...
