20 Chapter 2
Standard CMOS Features
Select Standard CMOS Features from the main menu to configure some basic parameters in your system.
The following screen shows the Standard CMOS Features menu:
The following table describes the parameters found in this menu. Settings in boldface are the default and
suggested settings.
Parameter Description Options
Date Lets you set the date following the weekday-
month-day-year format
Weekday: Sun, Mon...Sat
Month: Jan, Feb...Dec.
Day: 1 to 30
Year: 1980 to 2079
Time Lets you set the time following the hour-minute-
second format
Hour: 0 to 23
Minute: 0 to 59
Second: 0 to 59
IDE Channel 0 Master Allows you to configure the hard disk drive
connected to the master port of IDE channel 0.
To enter the IDE Channel 0 Master setup, press
[Enter].
The IDE CD-ROM is always automatically
detected.
IDE Device Model Number:
None
IDE Channel 0 Slave Allows you to configure the hard disk drive
connected to the slave port of IDE channel 0.
To enter the IDE Channel 0 Slave setup, press
[Enter].
The IDE CD-ROM is always automatically
detected.
IDE Device Model Number:
None
To Next Page
Loading...
