Acer Aspire T310 - Standard Reassembly Procedure; Installing the Daughter Board; Installing the LED Module; Installing the Power Button

50 Chapter 3
Standard Reassembly Procedure
This section tells you how to reassemble the system when you need to perform system service. Please also
refer to the assembly video, if available.
Installing the Daughter Board
1. Connect the audio cable and USB cables to the daughter board.
2. Fasten the daughter board with one screw as shown here.
Installing the LED Module
1. Install the LED module by following the instructions here.
Installing the Power Button
1. Attach the power button as shown here.
Installing the Mainboard
1. Put the motherboard to the original position as shown here.